Enable EAP methods in wpa_supplicant configuration by uncommenting CONFIG_IEEE8021X_EAPOL, CONFIG_EAP_TLS, CONFIG_EAP_PEAP, and CONFIG_EAP_TTLS for enhanced authentication support.

build.sh

@@ -11,6 +11,7 @@ set -euo pipefail
 
 TOOLCHAIN_PREFIX="${TOOLCHAIN_PREFIX:-arm-uclinuxfdpiceabi}"
 CC_BIN="${CC_BIN:-${TOOLCHAIN_PREFIX}-gcc}"
+STRIP_BIN="${STRIP_BIN:-${TOOLCHAIN_PREFIX}-strip}"
 JOBS="${JOBS:-$(nproc)}"
 
 SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
@@ -32,6 +33,9 @@ die() {
 if ! command -v "${CC_BIN}" >/dev/null 2>&1; then
   die "Compiler not found in PATH: ${CC_BIN}"
 fi
+if ! command -v "${STRIP_BIN}" >/dev/null 2>&1; then
+  die "Strip tool not found in PATH: ${STRIP_BIN}"
+fi
 
 if [ ! -d "${WPA_DIR}" ]; then
   die "wpa_supplicant directory not found: ${WPA_DIR}"
@@ -77,5 +81,6 @@ echo "libnl-genl-3.0 version: $(pkg-config --modversion libnl-genl-3.0)"
 cd "${WPA_DIR}"
 make clean
 make -j"${JOBS}" CC="${CC_BIN}"
+"${STRIP_BIN}" wpa_supplicant wpa_cli wpa_passphrase
 
 echo "Build completed successfully."

src/drivers/driver_nl80211.c

@@ -69,7 +69,7 @@ enum nlmsgerr_attrs {
 #ifndef NLA_S8
 /* libnl < 3.3 does not define signed 8-bit attr helpers */
 #define NLA_S8 NLA_U8
-static inline s8 nla_get_s8(const struct nlattr *nla)
+static inline s8 nla_get_s8(struct nlattr *nla)
 {
 	return (s8) nla_get_u8(nla);
 }

wpa_supplicant/.config

@@ -26,7 +26,7 @@
 # replacement for WEXT and its use allows wpa_supplicant to properly control
 # the driver to improve existing functionality like roaming and to support new
 # functionality.
-CONFIG_DRIVER_WEXT=y
+#CONFIG_DRIVER_WEXT=y
 
 # Driver interface for Linux drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y
@@ -91,7 +91,7 @@ CC=arm-uclinuxfdpiceabi-gcc
 
 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
 # MACsec is included)
-#CONFIG_IEEE8021X_EAPOL=y
+CONFIG_IEEE8021X_EAPOL=y
 
 # EAP-MD5
 #CONFIG_EAP_MD5=y
@@ -100,16 +100,16 @@ CC=arm-uclinuxfdpiceabi-gcc
 #CONFIG_EAP_MSCHAPV2=y
 
 # EAP-TLS
-#CONFIG_EAP_TLS=y
+CONFIG_EAP_TLS=y
 # Enable EAP-TLSv1.3 support by default (currently disabled unless explicitly
 # enabled in network configuration)
 #CONFIG_EAP_TLSV1_3=y
 
 # EAL-PEAP
-#CONFIG_EAP_PEAP=y
+CONFIG_EAP_PEAP=y
 
 # EAP-TTLS
-#CONFIG_EAP_TTLS=y
+CONFIG_EAP_TTLS=y
 
 # EAP-FAST
 #CONFIG_EAP_FAST=y
@@ -241,7 +241,7 @@ CONFIG_CTRL_IFACE=y
 # This can be used to reduce the size of the wpa_supplicant considerably
 # if debugging code is not needed. The size reduction can be around 35%
 # (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
+CONFIG_NO_STDOUT_DEBUG=y
 
 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
 # 35-50 kB in code size.
@@ -255,7 +255,7 @@ CONFIG_CTRL_IFACE=y
 #CONFIG_NO_WPA_PASSPHRASE=y
 
 # Simultaneous Authentication of Equals (SAE), WPA3-Personal
-#CONFIG_SAE=y
+CONFIG_SAE=y
 
 # SAE Public Key, WPA3-Personal
 #CONFIG_SAE_PK=y
@@ -639,7 +639,7 @@ CONFIG_BGSCAN_SIMPLE=y
 
 # Opportunistic Wireless Encryption (OWE)
 # Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
+CONFIG_OWE=y
 
 # Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
 #CONFIG_DPP=y