Added checking of unpacked archives before building

.gitignore

@@ -1,3 +1,4 @@
+lib
 build
 install
 *.tar.xz

build-libraries.sh

@@ -0,0 +1,162 @@
+#!/bin/bash
+set -e
+
+# Подготавливаем переменные
+
+TOP="$(pwd)"
+INSTALL_DIR="${TOP}/install"
+INSTALL_BIN_DIR="${INSTALL_DIR}/bin"
+
+# Запускаем предварительно для того чтобы подтянуть переменные
+. ./env.sh "${INSTALL_BIN_DIR}"
+
+# Подготавливаем пути к разделам
+
+LIB_DIR="${TOP}/lib"
+SYSROOT_DIR="${INSTALL_DIR}${SYSROOT}"
+SYSROOT_ETC_DIR="${SYSROOT_DIR}/etc"
+SYSROOT_USR_DIR="${SYSROOT_DIR}/usr"
+BUILD_SRC_DIR="${TOP}/build"
+LIB_BUILD_DIR="${BUILD_SRC_DIR}/lib"
+
+# ==================================================================
+# Проверка файла окружения
+# ==================================================================
+
+# Проверяем существует ли файл
+if [ ! -f ./env.sh ]; then
+    echo "Ошибка: файл env.sh не найден"
+    exit 1
+fi
+
+# Проверяем имеет ли файл права на исполнение
+if [ ! -x ./env.sh ]; then
+    echo "env.sh не имеет права на выполнение, добавляю..."
+    chmod +x ./env.sh || { echo "Не удалось установить права"; exit 1; }
+fi
+
+# ==================================================================
+# Распаковка библиотек
+# ==================================================================
+
+echo "== Распаковка библиотек =="
+
+# Создаем каталог для сборки библиотек
+mkdir -p "${LIB_BUILD_DIR}"
+
+echo "== Поиск и распаковка архивов в ${LIB_DIR} =="
+
+# Проходимся по *.tar.xz и *.tar.gz
+shopt -s nullglob
+for archive in "${LIB_DIR}"/*.tar.xz "${LIB_DIR}"/*.tar.gz; do
+    # Если файлов нет – ничего не делаем
+    [ -e "$archive" ] || continue
+
+    fname="$(basename "$archive")"
+    pkg="${fname%.tar.*}"      # имя папки после распаковки
+
+    echo "--------------------------------------"
+    echo "Найден архив: $fname"
+    echo "Распаковка в: ${LIB_BUILD_DIR}/${pkg}"
+    echo "--------------------------------------"
+
+    mkdir -p "${LIB_BUILD_DIR}/${pkg}"
+    tar -xf "$archive" -C "${LIB_BUILD_DIR}/${pkg}" --strip-components=1
+done
+shopt -u nullglob
+
+echo "== Распаковка завершена =="
+
+# ==================================================================
+# Установка окружения
+# ==================================================================
+
+cd ${TOP}
+./env.sh "${INSTALL_BIN_DIR}" "rc"
+
+cd "${LIB_BUILD_DIR}/zlib-1.2.13"
+./configure --prefix=${SYSROOT_USR_DIR} --libdir=${SYSROOT_USR_DIR}/lib --static
+make -j$(nproc)
+make install
+
+# ==================================================================
+
+cd ${TOP}
+./env.sh "${INSTALL_BIN_DIR}"
+
+cd "${LIB_BUILD_DIR}/openssl-3.0.13"
+./Configure linux-armv4 \
+    --prefix=${SYSROOT_USR_DIR} \
+    --libdir=${SYSROOT_USR_DIR}/lib \
+    --openssldir=${SYSROOT_ETC_DIR}/ssl \
+	enable-legacy no-mdc2 no-rc5 no-ec2m no-sm2 no-sm4 no-ssl3 \
+    no-shared no-dso no-async no-comp no-idea no-tests no-threads no-asm no-secure-memory no-seed no-weak-ssl-ciphers \
+    no-afalgeng no-aria no-async no-bf no-blake2 no-camellia no-capieng no-cast no-chacha no-cms no-cmp no-ct \
+    no-dgram no-dsa no-dtls no-ecdh no-ecdsa no-engine no-err no-filenames no-gost no-md4 \
+    no-ocsp no-pinshared no-poly1305 no-posix-io no-rc2 no-rc4 no-rdrand no-rfc3779 no-rmd160 no-scrypt no-sctp no-siphash \
+    no-sm3 no-srp no-srtp no-ssl-trace no-ssl3 no-ssl3-method no-ts no-whirlpool enable-ktls \
+    -DNO_FORK -DHAVE_FORK=0
+
+make -j$(nproc) build_libs
+make install_sw
+
+# ==================================================================
+
+cd "${LIB_BUILD_DIR}/LibVNCServer-0.9.14"
+rm -rf build
+mkdir -p build && cd build
+cmake -S .. -B . \
+  -DBUILD_SHARED_LIBS=OFF \
+  -DWITH_THREADS=OFF \
+  -DWITH_TESTS=OFF \
+  -DWITH_EXAMPLES=OFF \
+  -DWITH_ZLIB=OFF \
+  -DWITH_LZO=OFF \
+  -DWITH_JPEG=OFF \
+  -DWITH_PNG=OFF \
+  -DWITH_SDL=OFF \
+  -DWITH_GTK=OFF \
+  -DWITH_LIBSSH2=OFF \
+  -DWITH_GNUTLS=OFF \
+  -DWITH_GCRYPT=OFF \
+  -DWITH_FFMPEG=OFF \
+  -DWITH_TIGHTVNC_FILETRANSFER=OFF \
+  -WITH_IPv6=ON \
+  -DWITH_WEBSOCKETS=OFF \
+  -DWITH_SASL=OFF \
+  -DWITH_OPENSSL=OFF \
+  -DOPENSSL_ROOT_DIR="${SYSROOT_USR_DIR}" \
+  -DOPENSSL_LIBRARIES="${SYSROOT_USR_DIR}/lib/libssl.a;${SYSROOT_USR_DIR}/lib/libcrypto.a" \
+  -DOPENSSL_INCLUDE_DIR="${SYSROOT_USR_DIR}/include" \
+  -DCMAKE_BUILD_TYPE=Release \
+  -DCMAKE_FIND_ROOT_PATH="${SYSROOT_DIR}" \
+  -DCMAKE_SYSROOT="${SYSROOT_DIR}" \
+  -DCMAKE_STAGING_PREFIX="${SYSROOT_USR_DIR}"
+
+make -j$(nproc)
+make install
+
+# ==================================================================
+
+cd "${LIB_BUILD_DIR}/freetype-2.13.2"
+[ -d "build" ] && rm -rf build
+mkdir -p build && cd build
+cmake -S .. -B . \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DFT_DISABLE_HARFBUZZ=ON \
+    -DBUILD_SHARED_LIBS=OFF \
+    -DFT_DISABLE_BROTLI=ON \
+    -DFT_DISABLE_BZIP2=ON \
+    -DFT_DISABLE_PNG=ON \
+    -DFT_DISABLE_DOCS=ON \
+    -DFT_DISABLE_TESTS=ON \
+    -DCMAKE_INSTALL_PREFIX="${SYSROOT_USR_DIR}" \
+    -DCMAKE_FIND_ROOT_PATH="${SYSROOT_DIR}" \
+    -DCMAKE_SYSROOT="${SYSROOT_DIR}" \
+    -DCMAKE_STAGING_PREFIX="${SYSROOT_USR_DIR}" \
+    -DZLIB_LIBRARY="${SYSROOT_USR_DIR}/lib/libz.a" \
+    -DZLIB_INCLUDE_DIR="${SYSROOT_USR_DIR}/include" \
+    -DZLIB_USE_STATIC=ON
+
+make -j$(nproc)
+make install

build-toolchain.sh

@@ -1,82 +1,110 @@
 #!/bin/bash
 set -e
 
-TARGET=arm-uclinuxfdpiceabi
+# ==================================================================
+# Названия пакетов
+# ==================================================================
+PKG_BINUTILS="binutils"
+PKG_GCC="gcc"
+PKG_LINUX="linux"
+PKG_UCLIBC="uClibc-ng"
+
+# ==================================================================
+# Версии пакетов
+# ==================================================================
+BINUTILS_VER="2.42"
+GCC_VER="13.4.0"
+LINUX_VER="4.9.224"
+UCLIBC_VER="1.0.34"
+
+# ==================================================================
+# Основные параметры тулчейна
+# ==================================================================
+TARGET="arm-uclinuxfdpiceabi"
+SUBARCH="armv7-m"
+SUBMODE="thumb"
+
 TOP="$(pwd)"
+CONFIGS_DIR="${TOP}/config"
 
 BUILD_DIR="${TOP}/build"
 BUILD_SRC_DIR="${BUILD_DIR}/src"
 
 INSTALL_DIR="${TOP}/install"
 INSTALL_BIN_DIR="${INSTALL_DIR}/bin"
+
 KERNEL_SYSROOT_DIR="${INSTALL_DIR}/sysroot"
 KERNEL_SYSROOT_USR_DIR="${KERNEL_SYSROOT_DIR}/usr"
 KERNEL_SYSROOT_USR_INCLUDES_DIR="${KERNEL_SYSROOT_USR_DIR}/include"
 
 CFLAGS_TOOLSET='-O2'
 CFLAGS_TARGET='-Os -mthumb'
-CFLAGS=$CFLAGS_TOOLSET CFLAGS_FOR_TARGET=$CFLAGS_TARGET
-CXXFLAGS_FOR_TARGET=$CFLAGS_TARGET
 
-SUBARCH=armv7-m
+export CFLAGS=$CFLAGS_TOOLSET
-SUBMODE=thumb
+export CFLAGS_FOR_TARGET=$CFLAGS_TARGET
+export CXXFLAGS_FOR_TARGET=$CFLAGS_TARGET
 
+# ==================================================================
+# Имена распакованных директорий (обычно совпадают с версией)
+# ==================================================================
+SRC_BINUTILS="${BUILD_SRC_DIR}/${PKG_BINUTILS}-${BINUTILS_VER}"
+SRC_GCC="${BUILD_SRC_DIR}/${PKG_GCC}-${GCC_VER}"
+SRC_LINUX="${BUILD_SRC_DIR}/${PKG_LINUX}-${LINUX_VER}"
+SRC_UCLIBC="${BUILD_SRC_DIR}/${PKG_UCLIBC}-${UCLIBC_VER}"
+
+# ==================================================================
 echo "== Создание директорий =="
-mkdir -p ${KERNEL_SYSROOT_DIR}
+mkdir -p "${KERNEL_SYSROOT_DIR}" "${BUILD_SRC_DIR}"
-mkdir -p ${BUILD_SRC_DIR}
 
-#######################################
+echo "== Распаковка архивов в ${BUILD_SRC_DIR} =="
-# РАСПАКОВКА В build/src
+shopt -s nullglob
-#######################################
-echo "== Распаковка архивов в build/src =="
 for f in *.tar.xz; do
+    [ -f "$f" ] || { echo "Нет архивов *.tar.xz в текущей директории!"; exit 1; }
     echo " * $f"
-    tar -xf "$f" -C ${BUILD_SRC_DIR}
+
+    dirname="${f%.tar.xz}"
+    target_dir="${BUILD_SRC_DIR}/${dirname}"
+
+    if [ -d "$target_dir" ]; then
+        echo "   -> Пропуск: директория '${dirname}' уже существует"
+        continue
+    fi
+
+    echo "   -> Распаковка в '${BUILD_SRC_DIR}'"
+    tar -xf "$f" -C "${BUILD_SRC_DIR}"
 done
 
-# Пути на исходники
+# ==================================================================
-SRC_BINUTILS="${BUILD_SRC_DIR}/binutils-2.34"
-SRC_GCC="${BUILD_SRC_DIR}/gcc-13.4.0"
-SRC_LINUX="${BUILD_SRC_DIR}/linux-4.9.224"
-SRC_UCLIBC="${BUILD_SRC_DIR}/uClibc-ng-1.0.34"
-
-#######################################
 # BINUTILS
-#######################################
+# ==================================================================
-echo "== Сборка binutils =="
+echo "== Сборка binutils-${BINUTILS_VER} =="
-
+rm -rf build/binutils && mkdir -p build/binutils && cd build/binutils
-mkdir -p build/binutils
+"${SRC_BINUTILS}/configure" \
-cd build/binutils
+    --target="${TARGET}" \
-
+    --prefix="${INSTALL_DIR}" \
-$SRC_BINUTILS/configure \
+    --with-sysroot="${KERNEL_SYSROOT_DIR}" \
-    --target=${TARGET} \
-    --prefix=${INSTALL_DIR} \
-    --with-sysroot=${KERNEL_SYSROOT_DIR} \
     --disable-nls \
     --without-bugurl \
     --disable-werror
-
+make -j$(nproc) all
-make -j12
 make install
-cd ../..
+cd "${TOP}"
 
-#######################################
+# ==================================================================
-# GCC STAGE 1
+# GCC STAGE 1 (только C, без libc)
-#######################################
+# ==================================================================
-echo "== Сборка GCC Stage 1 =="
+echo "== Сборка GCC-${GCC_VER} Stage 1 =="
 
-cd $SRC_GCC
+cd "${SRC_GCC}"
 ./contrib/download_prerequisites
-cd ../../..
+cd "${TOP}"
 
-mkdir -p build/gcc1
+rm -rf build/gcc1 && mkdir -p build/gcc1 && cd build/gcc1
-cd build/gcc1
+"${SRC_GCC}/configure" \
-
+    --target="${TARGET}" \
-$SRC_GCC/configure \
+    --prefix="${INSTALL_DIR}" \
-    --target=${TARGET} \
+    --with-arch="${SUBARCH}" \
-    --prefix=${INSTALL_DIR} \
+    --with-mode="${SUBMODE}" \
-    --with-arch=${SUBARCH} \
-    --with-mode=${SUBMODE} \
     --without-headers \
     --with-newlib \
     --disable-shared \
@@ -92,57 +120,67 @@ $SRC_GCC/configure \
     --disable-nls \
     --disable-libatomic
 
-make -j12
+make -j$(nproc) all-gcc
-make install
+make install-gcc
-cd ../..
+make -j$(nproc) all-target-libgcc
+make install-target-libgcc
+cd "${TOP}"
 
-#######################################
+# ==================================================================
-# LINUX HEADERS
+# Linux headers
-#######################################
+# ==================================================================
-echo "== Установка заголовков linux =="
+echo "== Установка заголовков linux-${LINUX_VER} =="
 
-mkdir -p build/kernelheader
+rm -rf build/kernelheader && mkdir -p build/kernelheader
-cd $SRC_LINUX
+cd "${SRC_LINUX}"
 
-PATH=${INSTALL_BIN_DIR}:${PATH} \
+PATH="${INSTALL_BIN_DIR}:${PATH}" \
-make headers_install ARCH=arm \
+make ARCH=arm \
-    INSTALL_HDR_PATH=${KERNEL_SYSROOT_USR_DIR} \
+     INSTALL_HDR_PATH="${KERNEL_SYSROOT_USR_DIR}" \
-    CROSS_COMPILE=${TARGET}- \
+     CROSS_COMPILE="${TARGET}-" \
-    O=${TOP}/build/kernelheader
+     O="${TOP}/build/kernelheader" \
+     headers_install
+cd "${TOP}"
 
-cd ../../..
+# ==================================================================
+# uClibc-ng
+# ==================================================================
+echo "== Сборка uClibc-ng-${UCLIBC_VER} =="
+cd "${SRC_UCLIBC}"
 
-#######################################
+# Подготовка .config перед сборкой uClibc-ng
-# UCLIBC
+CONFIG_SRC_FILE="${CONFIGS_DIR}/config-${PKG_UCLIBC}-${UCLIBC_VER}"
-#######################################
-echo "== Сборка uClibc =="
 
-cd $SRC_UCLIBC
+# Если в TOP существует .config-<версия uclibc>, копируем его
+if [ -f "${CONFIG_SRC_FILE}" ]; then
+    echo "== Найден ${CONFIG_SRC_FILE}, копирую в .config =="
+    cp "${CONFIG_SRC_FILE}" .config
+else
+    echo "== Файл ${CONFIG_SRC_FILE} не найден, используем существующий .config =="
+fi
 
-# Удаляем старое значение
+# Обновляем путь к заголовкам ядра — сначала удаляем старую строку
-sed -i '/^KERNEL_HEADERS=/d' .config
+sed -i '/^KERNEL_HEADERS=/d' .config 2>/dev/null || true
 
-# Добавляем новое
+# Добавляем новый путь
 echo "KERNEL_HEADERS=\"${KERNEL_SYSROOT_USR_INCLUDES_DIR}\"" >> .config
 
-PATH=${TOP}/install/bin:${PATH} make all -j12
+PATH="${INSTALL_BIN_DIR}:${PATH}" make oldconfig || true
-PATH=${TOP}/install/bin:${PATH} make PREFIX=${KERNEL_SYSROOT_DIR} install
+PATH="${INSTALL_BIN_DIR}:${PATH}" make -j$(nproc)
-cd ../../..
+PATH="${INSTALL_BIN_DIR}:${PATH}" make PREFIX="${KERNEL_SYSROOT_DIR}" install
+cd "${TOP}"
 
-#######################################
+# ==================================================================
-# GCC FINAL
+# GCC FINAL (C + C++)
-#######################################
+# ==================================================================
-echo "== Сборка финального GCC =="
+echo "== Сборка финального GCC-${GCC_VER} (C+C++) =="
-
+rm -rf build/gcc2 && mkdir -p build/gcc2 && cd build/gcc2
-mkdir -p build/gcc2
+"${SRC_GCC}/configure" \
-cd build/gcc2
+    --target="${TARGET}" \
-
+    --prefix="${INSTALL_DIR}" \
-$SRC_GCC/configure \
+    --with-sysroot="${KERNEL_SYSROOT_DIR}" \
-    --target=${TARGET} \
+    --with-arch="${SUBARCH}" \
-    --prefix=${INSTALL_DIR} \
+    --with-mode="${SUBMODE}" \
-    --with-sysroot=${KERNEL_SYSROOT_DIR} \
-    --with-arch=${SUBARCH} \
-    --with-mode=${SUBMODE} \
     --enable-languages=c,c++ \
     --enable-threads=posix \
     --enable-fdpic \
@@ -152,42 +190,41 @@ $SRC_GCC/configure \
     --disable-libgomp \
     --disable-libatomic
 
-make -j12
+make -j$(nproc)
 make install
-cd ../..
+cd "${TOP}"
 
-#######################################
+# ==================================================================
-# STRIP
+# Установка библиотек
-#######################################
+# ==================================================================
-echo "== Strip toolchain =="
 
+./build-libraries.sh
+
+# ==================================================================
+# Strip и упаковка
+# ==================================================================
+echo "== Strip toolchain и упаковка =="
+
+cd ${TOP}
 WDIR=$(mktemp -d)
-trap "rm -Rf $WDIR" EXIT
+trap 'rm -rf "$WDIR"' EXIT
 
-tar -C install --atime-preserve -cf - . | tar --atime-preserve -xf - -C $WDIR
+cp -a install/* "$WDIR"/
-find $WDIR -type f -exec strip -p {} \; > /dev/null 2>&1
+find "$WDIR" -type f -executable -exec strip -p {} \; 2>/dev/null || true
-find $WDIR -exec install/bin/${TARGET}-strip -p {} \; > /dev/null 2>&1
 
-tar -C "$WDIR" --atime-preserve -cJf "toolset-jlv-${SUBARCH}.tar.xz" .
+tar -C "$WDIR" --owner=0 --group=0 -cJf "toolset-jlv-${SUBARCH}-gcc${GCC_VER}-uclibc${UCLIBC_VER}.tar.xz" .
+echo "Готово: toolset-jlv-${SUBARCH}-gcc${GCC_VER}-uclibc${UCLIBC_VER}.tar.xz"
 
-echo "== Готово =="
+# ==================================================================
-
+# Очистка
-#######################################
+# ==================================================================
-# УПРАВЛЕНИЕ АРХИВАМИ
-#######################################
-echo ""
-echo "=== Управление архивами ==="
-echo "Собран тулчейн: toolset-jlv-${SUBARCH}.tar.xz"
-
-read -p "Удалить исходные архивы (*.tar.xz)? (y/N): " -n 1 -r
 echo
-[[ $REPLY =~ ^[Yy]$ ]] && rm -f *.tar.xz && echo "Архивы удалены."
+echo "=== Управление архивами и очистка ==="
+read -p "Удалить исходники (*.tar.xz)? (y/N): " -n 1 -r REPLY; echo
+[[ $REPLY =~ ^[Yy]$ ]] && rm -f *.tar.xz && echo "Исходные архивы удалены."
+
+read -p "Удалить директории сборки (build/, install/)? (y/N): " -n 1 -r REPLY; echo
+[[ $REPLY =~ ^[Yy]$ ]] && rm -rf build install && echo "Директории сборки удалены."
 
-echo ""
-echo "=== Очистка временных файлов ==="
-read -p "Удалить директории сборки (build/src и build/*)? (y/N): " -n 1 -r
 echo
-[[ $REPLY =~ ^[Yy]$ ]] && rm -rf build && echo "Временные файлы удалены."
+echo "== Сборка полностью завершена! =="
-
-echo ""
-echo "== Сборка завершена полностью =="

config/config-uClibc-ng-1.0.34

@@ -0,0 +1,246 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# uClibc-ng 1.0.34 C Library Configuration
+#
+# TARGET_aarch64 is not set
+# TARGET_alpha is not set
+# TARGET_arc is not set
+TARGET_arm=y
+# TARGET_avr32 is not set
+# TARGET_bfin is not set
+# TARGET_c6x is not set
+# TARGET_cris is not set
+# TARGET_csky is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_hppa is not set
+# TARGET_i386 is not set
+# TARGET_ia64 is not set
+# TARGET_lm32 is not set
+# TARGET_m68k is not set
+# TARGET_metag is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nds32 is not set
+# TARGET_nios2 is not set
+# TARGET_or1k is not set
+# TARGET_powerpc is not set
+# TARGET_riscv64 is not set
+# TARGET_sh is not set
+# TARGET_sparc is not set
+# TARGET_sparc64 is not set
+# TARGET_tile is not set
+# TARGET_x86_64 is not set
+# TARGET_xtensa is not set
+
+#
+# Target Architecture Features and Options
+#
+TARGET_ARCH="arm"
+FORCE_OPTIONS_FOR_ARCH=y
+CONFIG_ARM_EABI=y
+TARGET_SUBARCH=""
+UCLIBC_FORMAT_FDPIC_ELF=y
+# UCLIBC_FORMAT_FLAT is not set
+# UCLIBC_FORMAT_FLAT_SEP_DATA is not set
+# UCLIBC_FORMAT_SHARED_FLAT is not set
+ARCH_HAS_DEPRECATED_SYSCALLS=y
+ARCH_ANY_ENDIAN=y
+ARCH_LITTLE_ENDIAN=y
+# ARCH_WANTS_BIG_ENDIAN is not set
+ARCH_WANTS_LITTLE_ENDIAN=y
+ARCH_HAS_MMU=y
+# ARCH_USE_MMU is not set
+UCLIBC_HAS_FLOATS=y
+# UCLIBC_HAS_FPU is not set
+UCLIBC_HAS_SOFT_FLOAT=y
+DO_C99_MATH=y
+DO_XSI_MATH=y
+UCLIBC_HAS_LONG_DOUBLE_MATH=y
+KERNEL_HEADERS="../install/sysroot/usr/include"
+UCLIBC_UCLINUX_BROKEN_MUNMAP=y
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+DOPIC=y
+ARCH_HAS_UCONTEXT=y
+HAVE_SHARED=y
+FORCE_SHAREABLE_TEXT_SEGMENTS=y
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+LDSO_PRELOAD_ENV_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+# LDSO_STANDALONE_SUPPORT is not set
+# LDSO_PRELINK_SUPPORT is not set
+UCLIBC_STATIC_LDCONFIG=y
+LDSO_RUNPATH=y
+# LDSO_RUNPATH_OF_EXECUTABLE is not set
+LDSO_SAFE_RUNPATH=y
+LDSO_SEARCH_INTERP_PATH=y
+LDSO_LD_LIBRARY_PATH=y
+UCLIBC_CTOR_DTOR=y
+# LDSO_GNU_HASH_SUPPORT is not set
+# HAS_NO_THREADS is not set
+# UCLIBC_HAS_LINUXTHREADS is not set
+UCLIBC_HAS_THREADS_NATIVE=y
+UCLIBC_HAS_THREADS=y
+UCLIBC_HAS_TLS=y
+PTHREADS_DEBUG_SUPPORT=y
+UCLIBC_HAS_SYSLOG=y
+UCLIBC_HAS_LFS=y
+MALLOC=y
+# MALLOC_SIMPLE is not set
+UCLIBC_DYNAMIC_ATEXIT=y
+UCLIBC_HAS_UTMPX=y
+# UCLIBC_HAS_UTMP is not set
+# UCLIBC_SUSV2_LEGACY is not set
+UCLIBC_SUSV3_LEGACY=y
+# UCLIBC_HAS_CONTEXT_FUNCS is not set
+UCLIBC_SUSV3_LEGACY_MACROS=y
+UCLIBC_SUSV4_LEGACY=y
+# UCLIBC_STRICT_HEADERS is not set
+# UCLIBC_HAS_STUBS is not set
+UCLIBC_HAS_SHADOW=y
+UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
+UCLIBC_HAS___PROGNAME=y
+UCLIBC_HAS_PTY=y
+ASSUME_DEVPTS=y
+UNIX98PTY_ONLY=y
+UCLIBC_HAS_GETPT=y
+UCLIBC_HAS_LIBUTIL=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+UCLIBC_FALLBACK_TO_ETC_LOCALTIME=y
+
+#
+# Advanced Library Settings
+#
+UCLIBC_PWD_BUFFER_SIZE=256
+UCLIBC_GRP_BUFFER_SIZE=256
+
+#
+# Support various families of functions
+#
+UCLIBC_LINUX_SPECIFIC=y
+UCLIBC_HAS_GNU_ERROR=y
+UCLIBC_BSD_SPECIFIC=y
+UCLIBC_HAS_BSD_ERR=y
+UCLIBC_HAS_OBSOLETE_BSD_SIGNAL=y
+# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
+# UCLIBC_NTP_LEGACY is not set
+# UCLIBC_SV4_DEPRECATED is not set
+UCLIBC_HAS_REALTIME=y
+UCLIBC_HAS_ADVANCED_REALTIME=y
+UCLIBC_HAS_EPOLL=y
+UCLIBC_HAS_XATTR=y
+UCLIBC_HAS_PROFILING=y
+UCLIBC_HAS_CRYPT_IMPL=y
+# UCLIBC_HAS_SHA256_CRYPT_IMPL is not set
+# UCLIBC_HAS_SHA512_CRYPT_IMPL is not set
+UCLIBC_HAS_CRYPT=y
+UCLIBC_HAS_NETWORK_SUPPORT=y
+UCLIBC_HAS_SOCKET=y
+UCLIBC_HAS_IPV4=y
+# UCLIBC_HAS_IPV6 is not set
+# UCLIBC_USE_NETLINK is not set
+# UCLIBC_HAS_BSD_RES_CLOSE is not set
+UCLIBC_HAS_COMPAT_RES_STATE=y
+# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set
+UCLIBC_HAS_RESOLVER_SUPPORT=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_STDIO_FUTEXES=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+UCLIBC_HAS_CTYPE_UNSAFE=y
+# UCLIBC_HAS_CTYPE_CHECKED is not set
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LIBICONV is not set
+# UCLIBC_HAS_LIBINTL is not set
+# UCLIBC_HAS_LOCALE is not set
+# UCLIBC_HAS_HEXADECIMAL_FLOATS is not set
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+# UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE is not set
+# UCLIBC_HAS_FOPEN_CLOSEEXEC_MODE is not set
+# UCLIBC_HAS_GLIBC_CUSTOM_STREAMS is not set
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+UCLIBC_HAS_GETOPT_LONG=y
+UCLIBC_HAS_GNU_GETSUBOPT=y
+# UCLIBC_HAS_ARGP is not set
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+UCLIBC_HAS_FNMATCH=y
+# UCLIBC_HAS_WORDEXP is not set
+UCLIBC_HAS_NFTW=y
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_FTS=y
+UCLIBC_HAS_GLOB=y
+UCLIBC_HAS_GNU_GLOB=y
+
+#
+# Library Installation Options
+#
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr"
+MULTILIB_DIR="lib"
+HARDWIRED_ABSPATH=y
+
+#
+# Security options
+#
+# UCLIBC_BUILD_PIE is not set
+UCLIBC_HAS_SSP=y
+# SSP_QUICK_CANARY is not set
+UCLIBC_BUILD_SSP=y
+# UCLIBC_BUILD_RELRO is not set
+UCLIBC_BUILD_NOW=y
+UCLIBC_BUILD_NOEXECSTACK=y
+
+#
+# Development/debugging options
+#
+CROSS_COMPILER_PREFIX="arm-uclinuxfdpiceabi-"
+UCLIBC_EXTRA_CFLAGS="-fomit-frame-pointer -funwind-tables -fasynchronous-unwind-tables"
+# DODEBUG is not set
+DOSTRIP=y
+DOASSERTS=y
+SUPPORT_LD_DEBUG=y
+# SUPPORT_LD_DEBUG_EARLY is not set
+# UCLIBC_MALLOC_DEBUGGING is not set
+# UCLIBC_HAS_BACKTRACE is not set
+WARNINGS="-Wall"
+EXTRA_WARNINGS=y

env.sh

@@ -0,0 +1,53 @@
+#!/bin/bash
+# env.sh — окружение для сборки под arm-uclinuxfdpiceabi (FDPIC, thumb)
+
+TOP="$(pwd)"
+TARGET=arm-uclinuxfdpiceabi
+TOOLCHAIN=arm-uclinuxfdpiceabi
+
+# Если передали путь — используем его, иначе берём bin в текущей папке
+# Пример вызова: ./env.sh /opt/toolchains/arm/bin
+TOOLCHAIN_PATH="${1:-${TOP}/${TARGET}/bin}"
+
+SYSROOT="${TOOLCHAIN_ROOT}/sysroot"
+PREFIX="${SYSROOT}/usr"
+
+# Флаги тулчейна
+CFLAGS_TOOLSET='-O2'
+ARFLAGS_TARGET="${2:-}"
+CFLAGS_TARGET='-Os -mthumb'
+CXXFLAGS_TARGET=$CFLAGS_TARGET
+LDFLAGS_TARGET='-Wl,--fdpic'
+
+# Указание полного пути к компиляторам
+CC="${TOOLCHAIN_PATH}/${TOOLCHAIN}-gcc ${CFLAGS_TOOLSET} ${CFLAGS_TARGET}"
+CXX="${TOOLCHAIN_PATH}/${TOOLCHAIN}-g++ ${CFLAGS_TOOLSET} ${CXXFLAGS_TARGET}"
+CPP="${TOOLCHAIN_PATH}/${TOOLCHAIN}-cpp"
+LD="${TOOLCHAIN_PATH}/${TOOLCHAIN}-ld"
+AR="${TOOLCHAIN_PATH}/${TOOLCHAIN}-ar ${ARFLAGS_TARGET}"
+AS="${TOOLCHAIN_PATH}/${TOOLCHAIN}-as"
+NM="${TOOLCHAIN_PATH}/${TOOLCHAIN}-nm"
+RANLIB="${TOOLCHAIN_PATH}/${TOOLCHAIN}-ranlib"
+STRIP="${TOOLCHAIN_PATH}/${TOOLCHAIN}-strip"
+OBJCOPY="${TOOLCHAIN_PATH}/${TOOLCHAIN}-objcopy"
+OBJDUMP="${TOOLCHAIN_PATH}/${TOOLCHAIN}-objdump"
+
+# PATH — toolchain/bin должен быть в начале
+PATH="${TOOLCHAIN_PATH}:${PATH}"
+
+# Экспорт
+export SYSROOT
+export PREFIX
+export TARGET
+export TOOLCHAIN
+export CC CXX CPP LD AR AS NM RANLIB STRIP OBJCOPY OBJDUMP
+export CFLAGS CXXFLAGS LDFLAGS
+export CFLAGS_FOR_TARGET CXXFLAGS_FOR_TARGET LDFLAGS_FOR_TARGET
+export PATH
+export SUBARCH=armv7-m
+export SUBMODE=thumb
+
+echo "Окружение для ${TARGET} (Thumb/FDPIC) активировано"
+echo "   TOOLCHAIN_PATH = $TOOLCHAIN_PATH"
+echo "   CC  = $CC"
+echo "   CXX = $CXX"